Tilt-Type Welding Positioner | Rotating Workpiece Positioner
Publish Time: 2026-11-16 Origin: Site
Tilt-Type Welding Positioner: Set Your Workpiece in the Ideal Welding Position
What Is a Welding Positioner?
A welding positioner is a dedicated auxiliary welding machine that holds a workpiece on a rotating table and tilts it through a chosen angle, so the weld joint can always be brought into a comfortable, flat or horizontal-vertical welding position. Instead of the welder moving around the part, the part is rotated and tilted to the torch.
Our tilt-type positioners are designed for fabrication shops, pressure vessel and pipe welding, structural steel, brackets, housings, and medium-size assemblies where consistent weld quality and efficient fixturing matter. The unit combines a rotating table, a tilt drive, a heavy welded-steel base, and a geared motor drive in one rigid frame.
How It Works
Workpiece clamping — the part is fixed to the tabletop with clamps, a fixture, or bolted directly to the table's center mounting flange.
Rotation — the table turns about the vertical axis to present each weld seam to the welder or welding torch.
Tilting — the table and frame swing about the horizontal axis through a sector-gear drive, bringing the joint into the most favorable welding position.
Welding — the operator (or an automated welding torch) welds at a controlled, steady speed while the positioner holds the part at the chosen angle.
Key Features
Rigid welded-steel frame — stress-relieved and fully welded base and uprights resist deflection under load and keep the table stable during rotation and tilting.
Sector-gear tilt drive — a toothed sector gear transmits the tilt motion smoothly, with positive positioning and reliable holding at the set angle.
Geared motor drive — an integrated motor-reducer unit provides controlled rotation speed and torque, suitable for continuous shop use.
Mounting table with center flange — the tabletop provides T-slot or bolted fixture mounting, adaptable to custom jigs and fixtures.
Stable floor-standing base — wide footed base anchors the unit to the shop floor, minimizing vibration during welding.
Flexible fixturing — tables, chucks, and fixtures can be tailored to the shape and weight of your specific workpiece.
Why Add a Welding Positioner?
Better weld quality — welding in the flat or horizontal-vertical position reduces defects such as undercut, slag inclusion, and poor fusion caused by overhead or vertical welding.
Higher productivity — the part rotates at a steady speed, cutting repositioning time and enabling longer, continuous welds.
Lower operator fatigue — the welder works in a natural, upright posture instead of climbing around the workpiece.
Safer working environment — heavy parts are held and moved by the machine rather than by manual lifting and turning.
Ready for automation — positioners can be paired with a welding manipulator or a robotic welding torch to form an automated welding station.
Applications
Structural steel, frames, brackets, and support arms
Flanges, pipe fittings, and elbows
Housings, gear cases, and welded assemblies
Pressure vessel and tank circumferential seams
Rolled, cast, or fabricated components requiring multi-side welding
From Our Workshop: Production in Progress
The photos below show our positioners during manufacture — frame fabrication, main-body welding, drive-unit installation, and final assembly in the workshop.
Close-up of the positioner frame being welded. The structural arm and base joints are fully welded to ensure rigidity under load.
Main-frame welding. The uprights and base are welded together to form the rigid load-bearing structure.
Positioner frames and tables lined up on the shop floor during batch production.
Installing the motor-reducer drive and sector gear, which provide rotation and tilt motion.
Final assembly: the rotating table and frame are aligned and fitted together before testing.
Typical Specifications
Final values are customized to your workpiece. Confirm capacity, table size, and tilt range with our sales engineer before ordering.
Item | Parameter |
|---|---|
Load capacity | [ e.g. 500 / 1000 / 2000 / 5000 kg ] |
Table diameter | [ e.g. 600 / 800 / 1000 / 1200 mm ] |
Table rotation speed | [ e.g. 0.15 – 2 r/min, stepless ] |
Tilt angle | [ e.g. 0 – 135° ] |
Tilt speed | [ e.g. 0.6 r/min ] |
Drive motor | [ geared motor, power TBD ] |
Table mounting | [ center flange / T-slots, custom fixture available ] |
Power supply | [ e.g. 380 V / 50 Hz / 3 Ph ] |
Finish | [ primed and painted, color on request ] |
Customization & Inquiry
We build positioners to match your workpiece weight, dimensions, and welding process. Custom table fixtures, chucking options, speed control, and integration with welding manipulators or robots are available.
Contact us with your workpiece drawing, weight, and weld requirements, and we will recommend a suitable model and configuration.