Welcome to Mirafu Machinery!

  +86-0510-83221997      info@mirafu.com
Home / News / Industry News / Plasma cutting quality control: Cutting Speed

Plasma cutting quality control: Cutting Speed

Views: 22     Author: Daphne     Publish Time: 2020-10-30      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Cutting Speed

Cutting speed also plays an important role in plasma cutting.

When the cutting speed is too high, the jet in the kerf can not blow the melted metal away quickly. There will be slag under the Kerf. At the same time, cutting 

quality will decline. This kind of slag is easy to remove. 

When the cutting speed is too low, the widness of kerf will be bigger. Top edge of the kerf will be round. Because plasma arc generate large quantity of heat there. 

Slag gathers and solidifies at the bottom of the plate, so it will be difficult to remove. 



  Ludai Road, Yangshan Town, Huishan District, Wuxi, China


  +86-0510-8322 1997



 2021 MiraFu Machinery Co.,LTD All Rights Reserved  Technology by leadong.com  备案号:苏ICP备19066052号